PCC M-Press Fittings
PCC M-Press Fittings

M-Press Project Portfolio

Hangar 10, Autonumis Ltd, Gloucestershire

Autonumis are a manufacturer of chilled drinks dispensers, small pack vending machines and back bar bottle coolers.  Their new facility just outside Stroud occupies one of the old aircraft hangars near the Cotswold Gliding Club.  Autonumis and the Gloucestrer based contractor, Hewer FM, decieded that for the transportation of gas into and around the factory, they would look at designing and installing a system of mechanically pressed Stainless Steel fittings and tube.  They decided on the M-Press system because it would provide an installed warranty of 40 years and a cost effective solutiuon  to their design.


M-Press Fittings supply a premium quality Stainless Steel system suitable for HWS, CWS, Compressed Air, Gas and Solar applications.  The systems are available from 15mm to 108mm and are guaranteed trouble free service and long life.  Please see our contacts page if you would like any more information or to arrange an appointment with one of our sales team.

KGN Pillinger, Bespoke Pumping Specialists, Croydon


KGN Pillinger is the UK's leading manufacturer, supplier and service agent for water pumping units and equipment.  KGN Pillinger have a very impressive array of product ranges from standard booster sets, bespoke pumping systems, pressurisations units, packaged plant rooms and waste water management solutions.


M-Press Fittings are very pleased to announce that we now supply our range of Stainless Steel fittings to KGN where they are used to build a number of these projects.  The engineers at KGN were keen to use a mechanical press system for their pipework jointing and with our comprehensive offering of Stainless Steel coupled with a 40 year installed warranty our products are now being used on some of these specialist designs.


The picture gallery below shows a recent KGN Pressurisation Unit complete with 4 x 500ltr Expansion Vessels.  M-Press Stainless Steel can be seen in the pipe connections for these units.


St John's School, Leatherhead


St John's School is a co-educational independent school in Leatherhead, Surrey with around 660 pupils aged between 13 and 18.  It was founded in 1851 and occupies a very picturesque corner of Leatherhead.  One of the plant rooms at the school was in need of some long overdue upgrading and renewing.  Omega Building Services based in Caterham-on-the-Hill were tasked with this project.  Roger and his team decided that they would use a mechanical press system to complete the works as it's speed of installation would mean that the job could be completed quickly and safely before the beginning of the new school year.  The M-Press systems offer a flame free solution to pipe and fittings jointing with no hot works to worry about.  Hot works permits can be inconvenient and do not always provide a safe and clean area in which to work.


With the M-Press system of Copper, Omega were able to complete the project to a very high standard that will give St John's a 30 year + installed warranty and many, many years of trouble free service.  The installation used M-Press Copper fittings from 35mm to 54mm.

Demead School, Hampton, Greater London


Denmead School is located in Hampton, Greater London.  It was originally founded in 1924 and occupied two houses on Wensleydale Road.  The project has been to construct a brand new school for pre-prep age groups of  3 to 7 years olds.


Omega Building Services (Caterham-on-the-Hill) decided that for the heating systems and plant room, they would once again use a mechanical press system that would allow their engineers to work safely and quickly installing the tube and fittings.  M-Press Carbon Steel has been used in 15mm to 76.1mm for these applications.  M-Press Copper has also been installed where potable water applictions were required.  The Copper system is fully WRAS approved and has been installed in 15mm to 54mm.


The school is due to open early 2016.

'The Mill', Kings Coughton, Warwickshire


Known locally as 'The Mill', this is one of our first Biomass projects in the South West.  M-Press Carbon Steel fittings and tube were chosen for part of the project.  The install was completed by Treco, one of the country's leading installers of biomass heating systems. Treco are based in Tiverton, Devon and over the past 10 years have built an impressive portfolio of biomass and district heating installations from small private projects to large commercial jobs.


The Mill is owned by Greenmech Ltd who design and manufacture wood chippers and green waste shredders.  M-Press was used in sizes 108mm down to 28mm which provided the Treco engineers with a safe, flame free working environment and a time saving install.  M-Press Carbon Steel is a 16bar rated system with a peak temperature range of 120degrees - the ideal solution for biomass.  The M-Press Carbon Steel system carries one of the longest Carbon Steel guarantees of it's kind.  Please visit our website www.mpressfittings.co.uk for more information and to see more projects like this.


Private Domestic Install, West Byfleet, Surrey

This project in a private house in Surrey demonstrates perfectly how M-Press Fittings can be utilised in domestic heating installations.  The job was carried out by Steve Sines Plumbing & Heating (Woking).  Steve has used M-Press Copper in 15mm, 22mm and 28mm to complete a fantasic looking domestic heating system complete with boiler and storage tank.  It shows how clean and professional M-Press Fittings can look while guaranteeing Steve's customer with 30 years +, trouble free service.  There are no scorch marks to worry about and no flux, just a clean, professional copper finish.  Steve sourced his fittings from D W Burns, Woking and Farnham.  If you would like to know more about this install or how M-Press can assist you in your next installation, please contact us through the contact page.


The Lyceum School, London



The Lyceum School is located in Worship Street in the heart of Shoreditch and is a short walk from Liverpool Street Station.  It is an independent, co-educational school originally opened in 1997.  The Worship Street site is an extension to the existing school and is due to open later in 2019.  M-Press Copper in 15mm to 42mm is being installed for the CWS/HWS/LTHW and Heating, by Priory Mechanical Services (Whyteleafe).

M-Press Fittings Ltd 

Foldhead Mills 


Huddersfield Road 

WF14 8DD

Tel: 01924 491797

Email: info@mpressfittings.co.uk

24 Hour Emergency:

07584 453922


Sales office opening hours

Monday - Friday 

8:30am - 17:00pm

Technical assistance

Our technical advice service is available 24/7.  Please call for assistance. 07584 453922

An Introduction......

PCC M-Press Fittings are the UK's latest manufacturer and supplier of mechanical press fittings. Following the popular 'M-Profile' press design, M-Press have introduced a range of mechanical press fittings for the commercial plumbing sector. The company was launched in the UK by - John Poole.  


John believes that there is an opportunity in the UK for a new supplier of this growing trend of plumbing fitting and utilising his 14 years experience at his last Company, he set about creating M-Press Fittings Ltd, a company that will firmly place customer values, loyalty, service, support and trust at the forefront of the business and everything we do moving forward.


We supply Stainless Steel, Carbon Steel, Copper and Multi Layer Press Fittings and Stainless Steel, Carbon Steel and Multi Layer Pipes.


Operating from our new offices and warehouses in Mirfield, West Yorkshire, we are on hand to take enquiries, orders and to arrange technical literature and price lists. 


Our Field Sales team covers the UK and are just a phonecall or an e-mail away. Please feel free to make contact with us at any time by clicking on the 'Contact us' link above.



Print Print | Sitemap
© M-Press Fittings